S23 8452 Baden – Langenthal

View line S23

Baden 14:04 → Langenthal 15:14 Daily 1 h 10 min · 18 stops SBB CFF FFS

Running now · updated 14:35

Position estimated from the timetable

Between Rupperswil and Aarau No data

Estimated arrival at Langenthal 15:14 · 60 km/h

  1. Baden14:04
  2. Lupfig14:18
  3. Lenzburg14:30
  4. Rupperswil14:35
  5. Aarau14:40
  6. Schönenwerd SO14:44
  7. Langenthal15:14
On-time · 30 days
97%
28/29 runs under 3 min
RT coverage: 29 full · 0 partial · 1 no data
On-time · 90 days
98%
50/51 runs under 3 min
RT coverage: 51 full · 0 partial · 1 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
0min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Langenthal, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Sat 24 Oct Max en route +4 min · last fix heading to Langenthal +4 min

Distribution · 90 days

51 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 2% · 1
  • On time 96% · 49
  • 3–10 min 2% · 1
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=7
  • 100% T n=7
  • 100% W n=8
  • 100% T n=7
  • 100% F n=8
  • 86% S n=7
  • 100% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (18 stops).

Last 90 days, 51 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
14:04on time on timePassed
14:08≈ on time ≈ on timePassed
14:13 / 14:14≈ on time ≈ on timePassed
14:18≈ on time ≈ on timePassed
14:20≈ on time ≈ on timePassed
14:25≈ on time ≈ on timePassed
14:30 / 14:31≈ on time ≈ on timePassed
14:35≈ on time ≈ on timePassed
14:40≈ on time ≈ on timeNext
14:44≈ on time ≈ on time
14:46≈ on time ≈ on time
14:49≈ on time ≈ on time
14:53 / 14:55≈ on time ≈ on time
14:59≈ on time ≈ on time
15:02≈ on time ≈ on time
15:07≈ on time ≈ on time
15:09≈ on time ≈ on time
15:14on time on time

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Thu 19 NovRupperswil 14:34Partial coverageNo data—
Wed 18 NovLangenthal 15:140 min—
Tue 17 NovLangenthal 15:140 min—
Mon 16 NovLangenthal 15:140 min—
Sun 15 NovLangenthal 15:14−1 min—
Sat 14 NovLangenthal 15:140 min—
Fri 13 NovLangenthal 15:14−1 min—
Thu 12 NovLangenthal 15:130 min—
Wed 11 NovLangenthal 15:14+1 min+1 min
Tue 10 NovLangenthal 15:14−1 min—
Mon 9 NovLangenthal 15:140 min—
Sun 8 NovLangenthal 15:140 min—
Sat 7 NovLangenthal 15:140 min—
Fri 6 NovLangenthal 15:140 min—
Thu 5 NovLangenthal 15:14−1 min—
Wed 4 NovLangenthal 15:140 min—
Tue 3 NovLangenthal 15:140 min—
Mon 2 NovLangenthal 15:140 min—
Sun 1 NovLangenthal 15:140 min—
Sat 31 OctLangenthal 15:140 min—
Fri 30 OctLangenthal 15:16+1 min—
Thu 29 OctLangenthal 15:150 min—
Wed 28 OctLangenthal 15:15−1 min—
Tue 27 OctLangenthal 15:150 min—
Mon 26 OctLangenthal 15:15−1 min—
Sun 25 OctLangenthal 15:24+1 min+1 min
Sat 24 OctLangenthal 15:27+4 min+4 min
Fri 23 OctLangenthal 15:150 min—
Thu 22 OctLangenthal 15:160 min—
Wed 21 OctLangenthal 15:14−1 min—