S23 8440 Baden – Langenthal

View line S23

Baden 11:04 → Langenthal 12:14 Daily 1 h 10 min · 18 stops SBB CFF FFS

Running now · updated 11:33

Position estimated from the timetable

Between Lenzburg and Rupperswil 0 min

Estimated arrival at Langenthal 12:14 · 54 km/h

  1. Baden11:04
  2. Lupfig11:18
  3. Lenzburg11:30
  4. Rupperswil11:35
  5. Schönenwerd SO11:44
  6. Dulliken11:49
  7. Langenthal12:14

Today it is running no worse than usual: typical arrival delay is 0 min; 100% of the last 23 runs arrived on time.

On-time · 30 days
100%
23/23 runs under 3 min
RT coverage: 22 full · 1 partial · 7 no data
On-time · 90 days
98%
45/46 runs under 3 min
RT coverage: 45 full · 1 partial · 9 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Langenthal, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Sun 4 Oct Max en route +4 min · last fix heading to Langenthal +4 min

Distribution · 90 days

46 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 2% · 1
  • On time 96% · 44
  • 3–10 min 2% · 1
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=2
  • 100% T n=7
  • 100% W n=9
  • 100% T n=7
  • 100% F n=7
  • 100% S n=7
  • 86% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (18 stops).

Last 90 days, 46 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
11:04on time on timePassed
11:08≈ on time ≈ on timePassed
11:13 / 11:14≈ on time ≈ on timePassed
11:18≈ on time ≈ on timePassed
11:20≈ on time ≈ on timePassed
11:25≈ on time ≈ on timePassed
11:30 / 11:31≈ on time ≈ on timePassed
11:35≈ on time ≈ on timeNext
11:40≈ on time ≈ +1 min
11:44≈ on time ≈ +1 min
11:46≈ on time ≈ +1 min
11:49≈ on time ≈ +1 min
11:53 / 11:55≈ on time ≈ +1 min
11:59≈ on time ≈ +1 min
12:02≈ on time ≈ +1 min
12:07≈ on time ≈ +1 min
12:09≈ on time ≈ +1 min
12:14on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Sun 15 NovLenzburg 11:29Partial coverage0 min—
Sat 14 NovLangenthal 12:140 min—
Fri 13 NovLangenthal 12:14−1 min—
Thu 12 NovLangenthal 12:14No data—
Wed 11 NovLangenthal 12:140 min—
Tue 10 NovLangenthal 12:140 min—
Mon 9 NovLangenthal 12:14No data—
Sun 8 NovLangenthal 12:17+1 min+1 min
Sat 7 NovLangenthal 12:14−1 min—
Fri 6 NovLangenthal 12:140 min—
Thu 5 NovLangenthal 12:14No data—
Wed 4 NovLangenthal 12:140 min—
Tue 3 NovLangenthal 12:140 min—
Mon 2 NovLangenthal 12:14No data—
Sun 1 NovLangenthal 12:16+1 min—
Sat 31 OctLangenthal 12:150 min—
Fri 30 OctLangenthal 12:150 min—
Thu 29 OctLangenthal 12:15No data—
Wed 28 OctLangenthal 12:150 min—
Tue 27 OctLangenthal 12:16+1 min+1 min
Mon 26 OctLangenthal 12:16No data—
Sun 25 OctLangenthal 12:24+1 min—
Sat 24 OctLangenthal 12:24+1 min+1 min
Fri 23 OctLangenthal 12:150 min—
Thu 22 OctLangenthal 12:150 min—
Wed 21 OctLangenthal 12:14−1 min—
Tue 20 OctLangenthal 12:16+1 min—
Mon 19 OctLangenthal 12:15No data—
Sun 18 OctLangenthal 12:18+2 min+2 min
Sat 17 OctLangenthal 12:14−1 min—