S10 25778 Mendrisio – Biasca

View line S10

Mendrisio 17:34 → Biasca 18:37 Daily 1 h 03 min · 11 stops SBB CFF FFS

Running now · updated 17:46

Position estimated from the timetable

Between Melide and Paradiso 0 min

Estimated arrival at Biasca 18:37 · 54 km/h

  1. Mendrisio17:34
  2. Capolago-Riva S. Vitale17:38
  3. Maroggia-Melano17:42
  4. Melide17:46
  5. Paradiso17:50
  6. Giubiasco18:07
  7. Biasca18:37

Today it is running no worse than usual: typical arrival delay is 0 min; 97% of the last 30 runs arrived on time.

On-time · 30 days
97%
29/30 runs under 3 min
RT coverage: 29 full · 1 partial · 0 no data
On-time · 90 days
98%
49/50 runs under 3 min
RT coverage: 49 full · 1 partial · 0 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+2min
9 in 10 runs arrive with less than this
30 days: +2 min

Last 30 days

Arrival delay at Biasca, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Fri 23 Oct Max en route +3 min · last fix heading to Biasca +3 min

Distribution · 90 days

50 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 16% · 8
  • On time 82% · 41
  • 3–10 min 2% · 1
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=7
  • 100% T n=9
  • 100% W n=7
  • 100% T n=7
  • 83% F n=6
  • 100% S n=7
  • 100% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (11 stops).

Last 90 days, 50 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
17:34on time on timePassed
17:35≈ on time ≈ on timePassed
17:38≈ on time ≈ on timePassed
17:42≈ on time ≈ on timePassed
17:46≈ on time ≈ on timePassed
17:50≈ on time ≈ +1 minNext
17:54 / 17:55≈ on time ≈ +1 min
18:07 / 18:09≈ on time ≈ +1 min
18:13 / 18:20≈ on time ≈ +1 min
18:24 / 18:25≈ on time ≈ +2 min
18:37on time +2 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Thu 19 NovMelide 17:44Partial coverage0 min—
Wed 18 NovBiasca 18:380 min—
Tue 17 NovBiasca 18:38−1 min—
Mon 16 NovBiasca 18:370 min—
Sun 15 NovBellinzona 18:13−1 min—
Sat 14 NovBellinzona 18:14+2 min+2 min
Fri 13 NovBiasca 18:390 min—
Thu 12 NovBiasca 18:39+1 min—
Wed 11 NovBiasca 18:39+2 min+2 min
Tue 10 NovBiasca 18:39+1 min+1 min
Mon 9 NovBiasca 18:39+1 min+1 min
Sun 8 NovBellinzona 18:140 min—
Sat 7 NovBellinzona 18:140 min—
Fri 6 NovBellinzona 18:140 min—
Thu 5 NovBiasca 18:380 min—
Wed 4 NovBiasca 18:38−1 min—
Tue 3 NovBiasca 18:39+2 min+2 min
Mon 2 NovBiasca 18:37−1 min—
Sun 1 NovBiasca 18:380 min—
Sat 31 OctBiasca 18:37−1 min—
Fri 30 OctBiasca 18:37−1 min—
Thu 29 OctBiasca 18:36−2 min—
Wed 28 OctBiasca 18:39+1 min—
Tue 27 OctBiasca 18:37−1 min—
Mon 26 OctBiasca 18:39+1 min—
Sun 25 OctBiasca 18:39+2 min+2 min
Sat 24 OctBiasca 18:380 min—
Fri 23 OctBiasca 18:41+3 min+3 min
Thu 22 OctBiasca 18:38−1 min—
Wed 21 OctBiasca 18:40+3 min+3 min