S3 21325 Luzern – Brunnen

View line S3

Luzern 07:06 → Brunnen 07:52 Daily 0 h 46 min · 11 stops SBB CFF FFS

✓ Today’s run finished

Today it reached Brunnen at 07:54 +2 min

  1. Luzern07:06
  2. Meggen Zentrum07:17
  3. Meggen07:19
  4. Küssnacht am Rigi07:25
  5. Arth-Goldau07:38
  6. Steinen07:43
  7. Brunnen07:52

Next service: tomorrow 07:06 from Luzern · Fri 13 Nov

Next departure 07:06 tomorrow · Luzern
On-time · 30 days
97%
29/30 runs under 3 min
RT coverage: 30 full · 0 partial · 0 no data
On-time · 90 days
93%
40/43 runs under 3 min
RT coverage: 43 full · 0 partial · 0 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+2min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Brunnen, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Tue 6 Oct Max en route +5 min · last fix heading to Brunnen +5 min
  • Mon 5 Oct Max en route +5 min · last fix heading to Brunnen +5 min
  • Fri 23 Oct Max en route +3 min · last fix heading to Brunnen +3 min

Distribution · 90 days

43 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 0% · 0
  • On time 93% · 40
  • 3–10 min 7% · 3
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 83% M n=6
  • 86% T n=7
  • 100% W n=7
  • 100% T n=6
  • 80% F n=5
  • 100% S n=5
  • 100% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (11 stops).

Last 90 days, 43 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10
07:06on time on time
07:13≈ on time ≈ on time
07:17≈ on time ≈ on time
07:19≈ on time ≈ +1 min
07:22≈ on time ≈ +1 min
07:25 / 07:26≈ on time ≈ +1 min
07:29 / 07:30≈ on time ≈ +1 min
07:38 / 07:39≈ on time ≈ +1 min
07:43≈ on time ≈ +1 min
07:48≈ on time ≈ +2 min
07:52on time +2 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Thu 12 NovBrunnen 07:54+2 min+2 min
Wed 11 NovBrunnen 07:54+2 min+2 min
Tue 10 NovBrunnen 07:530 min—
Mon 9 NovBrunnen 07:530 min—
Sun 8 NovBrunnen 07:530 min—
Sat 7 NovBrunnen 07:530 min—
Fri 6 NovBrunnen 07:53−1 min—
Thu 5 NovBrunnen 07:530 min—
Wed 4 NovBrunnen 07:530 min—
Tue 3 NovBrunnen 07:530 min—
Mon 2 NovBrunnen 07:530 min—
Sun 1 NovBrunnen 07:530 min—
Sat 31 OctBrunnen 07:52−1 min—
Fri 30 OctBrunnen 07:530 min—
Thu 29 OctBrunnen 07:53−1 min—
Wed 28 OctBrunnen 07:54+1 min—
Tue 27 OctBrunnen 07:540 min+2 min
Mon 26 OctBrunnen 07:530 min—
Sun 25 OctBrunnen 07:520 min—
Sat 24 OctBrunnen 07:530 min—
Fri 23 OctBrunnen 07:56+3 min+3 min
Thu 22 OctBrunnen 07:54+1 min—
Wed 21 OctBrunnen 07:530 min—
Tue 20 OctBrunnen 07:540 min—
Mon 19 OctBrunnen 07:530 min—
Sun 18 OctBrunnen 07:530 min—
Sat 17 OctBrunnen 07:53−1 min—
Fri 16 OctBrunnen 07:530 min—
Thu 15 OctBrunnen 07:55+1 min+1 min
Wed 14 OctBrunnen 07:530 min—