S31 16352 Münchenbuchsee – Belp

View line S31

Münchenbuchsee 14:33 → Belp 15:06 Mon, Tue, Wed, Thu, Fri 0 h 33 min · 11 stops BLS

Running now · updated 14:45

Position estimated from the timetable

Between Bern Wankdorf and Bern 0 min

Estimated arrival at Belp 15:06 · 9 km/h

  1. Münchenbuchsee14:33
  2. Bern Wankdorf14:39
  3. Bern14:44
  4. Bern Weissenbühl14:53
  5. Kehrsatz Nord14:58
  6. Kehrsatz15:00
  7. Belp15:06

Today it is running no worse than usual: typical arrival delay is 0 min; 86% of the last 22 runs arrived on time.

On-time · 30 days
86%
19/22 runs under 3 min
RT coverage: 21 full · 1 partial · 0 no data
On-time · 90 days
91%
31/34 runs under 3 min
RT coverage: 33 full · 1 partial · 0 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +3 min

Last 30 days

Arrival delay at Belp, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Mon 16 Nov Max en route +6 min · last fix heading to Belp +6 min
  • Tue 10 Nov Max en route +3 min · last fix heading to Belp +3 min
  • Fri 30 Oct Max en route +3 min · last fix heading to Belp +3 min

Distribution · 90 days

34 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 0% · 0
  • On time 91% · 31
  • 3–10 min 9% · 3
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 86% M n=7
  • 86% T n=7
  • 100% W n=7
  • 100% T n=7
  • 83% F n=6
  • — S n=0
  • — S n=0

Stops and timetable

Timetable of the latest run from the operator’s GTFS (11 stops).

Last 90 days, 34 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
14:33on time on timePassed
14:35 / 14:36≈ on time ≈ on timePassed
14:39≈ on time ≈ on timePassed
14:44 / 14:47≈ on time ≈ on timeNext
14:51≈ on time ≈ +1 min
14:53≈ on time ≈ +1 min
14:56≈ on time ≈ +1 min
14:58≈ on time ≈ +1 min
15:00≈ on time ≈ +1 min
15:03≈ on time ≈ +1 min
15:06on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Wed 18 NovBern 14:44Partial coverage0 min—
Tue 17 NovBelp 15:07+1 min—
Mon 16 NovBelp 15:12+6 min+6 min
Fri 13 NovBelp 15:070 min—
Thu 12 NovBelp 15:08+1 min—
Wed 11 NovBelp 15:070 min—
Tue 10 NovBelp 15:09+3 min+3 min
Mon 9 NovBelp 15:040 min—
Fri 6 NovBelp 15:040 min—
Thu 5 NovBelp 15:070 min—
Wed 4 NovBelp 15:070 min—
Tue 3 NovBelp 15:070 min—
Mon 2 NovBelp 15:070 min—
Fri 30 OctBelp 15:10+3 min+3 min
Thu 29 OctBelp 15:060 min—
Wed 28 OctBelp 15:08+1 min+1 min
Tue 27 OctBelp 15:070 min—
Mon 26 OctBelp 15:070 min—
Fri 23 OctBelp 15:070 min—
Thu 22 OctBelp 15:060 min—
Wed 21 OctBelp 15:070 min—
Tue 20 OctBelp 15:070 min—
Mon 19 OctBelp 15:060 min—
Fri 16 OctWabern bei Bern 14:580 min—
Thu 15 OctWabern bei Bern 14:570 min—
Wed 14 OctWabern bei Bern 14:570 min—
Tue 13 OctWabern bei Bern 14:570 min—
Mon 12 OctWabern bei Bern 14:58+1 min—
Fri 9 OctWabern bei Bern 14:560 min—
Thu 8 OctWabern bei Bern 14:570 min—