S31 16334 Münchenbuchsee – Belp

View line S31

Münchenbuchsee 10:01 → Belp 10:36 Mon, Tue, Wed, Thu, Fri 0 h 35 min · 11 stops BLS

Running now · updated 10:24

Position estimated from the timetable

Between Bern Weissenbühl and Wabern bei Bern 0 min

Estimated arrival at Belp 10:36 · 28 km/h

  1. Münchenbuchsee10:01
  2. Bern Wankdorf10:08
  3. Bern10:14
  4. Bern Weissenbühl10:23
  5. Wabern bei Bern10:26
  6. Kehrsatz Nord10:28
  7. Belp10:36

Today it is running worse than usual: typical arrival delay is 0 min; 100% of the last 20 runs arrived on time.

On-time · 30 days
100%
20/20 runs under 3 min
RT coverage: 19 full · 1 partial · 1 no data
On-time · 90 days
97%
31/32 runs under 3 min
RT coverage: 31 full · 1 partial · 1 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Belp, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Wed 14 Oct Max en route +3 min · last fix heading to Wabern bei Bern +3 min

Distribution · 90 days

32 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 3% · 1
  • On time 94% · 30
  • 3–10 min 3% · 1
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=7
  • 100% T n=7
  • 86% W n=7
  • 100% T n=5
  • 100% F n=6
  • — S n=0
  • — S n=0

Stops and timetable

Timetable of the latest run from the operator’s GTFS (11 stops).

Last 90 days, 32 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
10:01on time on timePassed
10:03≈ on time ≈ on timePassed
10:08 / 10:09≈ on time ≈ on timePassed
10:14 / 10:17≈ on time ≈ on timePassed
10:21≈ on time ≈ on timePassed
10:23≈ on time ≈ on timePassed
10:26≈ on time ≈ +1 minNext
10:28≈ on time ≈ +1 min
10:30≈ on time ≈ +1 min
10:33≈ on time ≈ +1 min
10:36on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Wed 18 NovBern Europaplatz 10:19Partial coverage0 min—
Tue 17 NovBelp 10:340 min—
Mon 16 NovBelp 10:370 min—
Fri 13 NovBelp 10:37−1 min—
Thu 12 NovBelp 10:370 min—
Wed 11 NovBelp 10:370 min—
Tue 10 NovBelp 10:340 min—
Mon 9 NovBelp 10:340 min—
Fri 6 NovBelp 10:340 min—
Thu 5 NovBelp 10:370 min—
Wed 4 NovBelp 10:370 min—
Mon 2 NovBelp 10:39+2 min+2 min
Fri 30 OctBelp 10:370 min—
Thu 29 OctBelp 10:37No data—
Wed 28 OctBelp 10:370 min—
Tue 27 OctBelp 10:37−1 min—
Mon 26 OctBelp 10:370 min—
Fri 23 OctBelp 10:38+1 min—
Thu 22 OctBelp 10:36−1 min—
Wed 21 OctBelp 10:370 min—
Tue 20 OctBelp 10:38+1 min—
Mon 19 OctBelp 10:370 min—
Fri 16 OctWabern bei Bern 10:270 min—
Thu 15 OctWabern bei Bern 10:270 min—
Wed 14 OctWabern bei Bern 10:30+3 min+3 min
Tue 13 OctWabern bei Bern 10:28+1 min—
Mon 12 OctWabern bei Bern 10:270 min—
Fri 9 OctWabern bei Bern 10:270 min—
Thu 8 OctWabern bei Bern 10:270 min—
Wed 7 OctWabern bei Bern 10:270 min—