S3 15366 Biel/Bienne – Belp

View line S3

Biel/Bienne 17:24 → Belp 18:21 Daily 0 h 57 min · 18 stops BLS

Running now · updated 17:43

Position estimated from the timetable

Between Schüpfen and Münchenbuchsee 0 min

Estimated arrival at Belp 18:21 · 72 km/h

  1. Biel/Bienne17:24
  2. Busswil BE17:32
  3. Schüpfen17:43
  4. Münchenbuchsee17:48
  5. Bern Wankdorf17:55
  6. Bern Europaplatz18:06
  7. Belp18:21

Today it is running no worse than usual: typical arrival delay is 0 min; 93% of the last 30 runs arrived on time.

On-time · 30 days
93%
28/30 runs under 3 min
RT coverage: 29 full · 1 partial · 0 no data
On-time · 90 days
96%
49/51 runs under 3 min
RT coverage: 50 full · 1 partial · 0 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Belp, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Worst days

  • Thu 12 Nov Max en route +5 min · last fix heading to Belp +5 min
  • Tue 27 Oct Max en route +4 min · last fix heading to Belp +4 min

Distribution · 90 days

51 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 0% · 0
  • On time 96% · 49
  • 3–10 min 4% · 2
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=7
  • 88% T n=8
  • 100% W n=10
  • 83% T n=6
  • 100% F n=7
  • 100% S n=6
  • 100% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (18 stops).

Last 90 days, 51 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
17:24on time on timePassed
17:27≈ on time ≈ on timePassed
17:30≈ on time ≈ on timePassed
17:32≈ on time ≈ on timePassed
17:36 / 17:37≈ on time ≈ on timePassed
17:40≈ on time ≈ on timePassed
17:43≈ on time ≈ +1 minPassed
17:48≈ on time ≈ +1 minNext
17:51≈ on time ≈ +1 min
17:55≈ on time ≈ +1 min
18:00 / 18:02≈ on time ≈ +1 min
18:06≈ on time ≈ +1 min
18:08≈ on time ≈ +1 min
18:11≈ on time ≈ +1 min
18:13≈ on time ≈ +1 min
18:15≈ on time ≈ +1 min
18:18≈ on time ≈ +1 min
18:21on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Mon 16 NovSuberg-Grossaffoltern 17:39Partial coverage0 min—
Sun 15 NovBelp 18:22+1 min—
Sat 14 NovBelp 18:220 min—
Fri 13 NovBelp 18:220 min—
Thu 12 NovBelp 18:23+5 min+5 min
Wed 11 NovBelp 18:23+1 min+1 min
Tue 10 NovBelp 18:220 min—
Mon 9 NovBelp 18:220 min—
Sun 8 NovBelp 18:23+1 min—
Sat 7 NovBelp 18:190 min—
Fri 6 NovBelp 18:190 min—
Thu 5 NovBelp 18:190 min—
Wed 4 NovBelp 18:230 min—
Tue 3 NovBelp 18:220 min—
Mon 2 NovBelp 18:220 min—
Sun 1 NovBelp 18:230 min—
Sat 31 OctBelp 18:23+1 min—
Fri 30 OctBelp 18:220 min—
Thu 29 OctBelp 18:21−1 min—
Wed 28 OctBelp 18:220 min—
Tue 27 OctBelp 18:26+4 min+4 min
Mon 26 OctBelp 18:220 min—
Sun 25 OctBelp 18:220 min—
Sat 24 OctBelp 18:220 min—
Fri 23 OctBelp 18:220 min—
Thu 22 OctBelp 18:22−1 min—
Wed 21 OctBelp 18:210 min—
Tue 20 OctBelp 18:220 min—
Mon 19 OctBelp 18:210 min—
Sun 18 OctBelp 18:21−1 min—