S3 15352 Biel/Bienne – Belp

View line S3

Biel/Bienne 13:54 → Belp 14:51 Daily 0 h 57 min · 18 stops BLS

Running now · updated 14:22

Position estimated from the timetable

Between Zollikofen and Bern Wankdorf 0 min

Estimated arrival at Belp 14:51 · 71 km/h

  1. Biel/Bienne13:54
  2. Busswil BE14:02
  3. Schüpfen14:13
  4. Zollikofen14:21
  5. Bern Wankdorf14:25
  6. Bern Europaplatz14:36
  7. Belp14:51

Today it is running no worse than usual: typical arrival delay is 0 min; 100% of the last 27 runs arrived on time.

On-time · 30 days
100%
27/27 runs under 3 min
RT coverage: 26 full · 1 partial · 3 no data
On-time · 90 days
100%
45/45 runs under 3 min
RT coverage: 44 full · 1 partial · 4 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Belp, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Distribution · 90 days

45 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 4% · 2
  • On time 96% · 43
  • 3–10 min 0% · 0
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=4
  • 100% T n=7
  • 100% W n=7
  • 100% T n=6
  • 100% F n=6
  • 100% S n=7
  • 100% S n=8

Stops and timetable

Timetable of the latest run from the operator’s GTFS (18 stops).

Last 90 days, 45 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
13:54on time on timePassed
13:57≈ on time ≈ on timePassed
14:00≈ on time ≈ on timePassed
14:02≈ on time ≈ on timePassed
14:06 / 14:07≈ on time ≈ on timePassed
14:10≈ on time ≈ on timePassed
14:13≈ on time ≈ on timePassed
14:18≈ on time ≈ +1 minPassed
14:21≈ on time ≈ +1 minPassed
14:25≈ on time ≈ +1 minNext
14:30 / 14:32≈ on time ≈ +1 min
14:36≈ on time ≈ +1 min
14:38≈ on time ≈ +1 min
14:41≈ on time ≈ +1 min
14:43≈ on time ≈ +1 min
14:45≈ on time ≈ +1 min
14:48≈ on time ≈ +1 min
14:51on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Wed 18 NovZollikofen 14:19Partial coverage0 min—
Tue 17 NovBelp 14:52−1 min—
Mon 16 NovBelp 14:520 min—
Sun 15 NovBelp 14:520 min—
Sat 14 NovBelp 14:53+1 min—
Fri 13 NovBelp 14:52−1 min—
Thu 12 NovBelp 14:510 min—
Wed 11 NovBelp 14:49−1 min—
Tue 10 NovBelp 14:54+3 min+3 min
Mon 9 NovBelp 14:49No data—
Sun 8 NovBelp 14:52−1 min—
Sat 7 NovBelp 14:490 min—
Fri 6 NovBelp 14:490 min—
Thu 5 NovBelp 14:53+1 min—
Wed 4 NovBelp 14:490 min—
Tue 3 NovBelp 14:54+2 min+2 min
Mon 2 NovBelp 14:52No data—
Sun 1 NovBelp 14:53+1 min+1 min
Sat 31 OctBelp 14:53+1 min—
Fri 30 OctBelp 14:51−1 min—
Thu 29 OctBelp 14:52No data—
Wed 28 OctBelp 14:520 min—
Tue 27 OctBelp 14:520 min—
Mon 26 OctBelp 14:520 min—
Sun 25 OctBelp 14:510 min—
Sat 24 OctBelp 14:51−1 min—
Fri 23 OctBelp 14:520 min—
Thu 22 OctBelp 14:55+3 min+3 min
Wed 21 OctBelp 14:53+1 min—
Tue 20 OctBelp 14:52−1 min—