S3 15336 Biel/Bienne – Belp

View line S3

Biel/Bienne 09:54 → Belp 10:51 Daily 0 h 57 min · 18 stops BLS

Running now · updated 10:25

Position estimated from the timetable

Between Bern Wankdorf and Bern 0 min

Estimated arrival at Belp 10:51 · 50 km/h

  1. Biel/Bienne09:54
  2. Busswil BE10:02
  3. Schüpfen10:13
  4. Bern Wankdorf10:25
  5. Bern10:30
  6. Bern Europaplatz10:36
  7. Belp10:51

Today it is running no worse than usual: typical arrival delay is 0 min; 100% of the last 29 runs arrived on time.

On-time · 30 days
100%
29/29 runs under 3 min
RT coverage: 28 full · 1 partial · 1 no data
On-time · 90 days
100%
52/52 runs under 3 min
RT coverage: 51 full · 1 partial · 1 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Belp, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Distribution · 90 days

52 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 2% · 1
  • On time 98% · 51
  • 3–10 min 0% · 0
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=8
  • 100% T n=9
  • 100% W n=8
  • 100% T n=6
  • 100% F n=7
  • 100% S n=7
  • 100% S n=7

Stops and timetable

Timetable of the latest run from the operator’s GTFS (18 stops).

Last 90 days, 52 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
09:54on time on timePassed
09:57≈ on time ≈ on timePassed
10:00≈ on time ≈ on timePassed
10:02≈ on time ≈ on timePassed
10:06 / 10:07≈ on time ≈ on timePassed
10:10≈ on time ≈ on timePassed
10:13≈ on time ≈ on timePassed
10:18≈ on time ≈ on timePassed
10:21≈ on time ≈ on timePassed
10:25≈ on time ≈ +1 minPassed
10:30 / 10:32≈ on time ≈ +1 minNext
10:36≈ on time ≈ +1 min
10:38≈ on time ≈ +1 min
10:41≈ on time ≈ +1 min
10:43≈ on time ≈ +1 min
10:45≈ on time ≈ +1 min
10:48≈ on time ≈ +1 min
10:51on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Wed 18 NovBern Wankdorf 10:24Partial coverage0 min—
Tue 17 NovBelp 10:520 min—
Mon 16 NovBelp 10:52+1 min—
Sun 15 NovBelp 10:53+1 min—
Sat 14 NovBelp 10:520 min—
Fri 13 NovBelp 10:530 min—
Thu 12 NovBelp 10:520 min—
Wed 11 NovBelp 10:53+1 min—
Tue 10 NovBelp 10:490 min—
Mon 9 NovBelp 10:53+1 min—
Sun 8 NovBelp 10:520 min—
Sat 7 NovBelp 10:490 min—
Fri 6 NovBelp 10:490 min—
Thu 5 NovBelp 10:520 min—
Wed 4 NovBelp 10:490 min—
Tue 3 NovBelp 10:520 min—
Mon 2 NovBelp 10:520 min—
Sun 1 NovBelp 10:53+1 min+1 min
Sat 31 OctBelp 10:53+1 min+1 min
Fri 30 OctBelp 10:51−1 min—
Thu 29 OctBelp 10:52No data—
Wed 28 OctBelp 10:53+1 min—
Tue 27 OctBelp 10:520 min—
Mon 26 OctBelp 10:520 min—
Sun 25 OctBelp 10:520 min—
Sat 24 OctBelp 10:53+1 min—
Fri 23 OctBelp 10:520 min—
Thu 22 OctBelp 10:51−1 min—
Wed 21 OctBelp 10:53+1 min+1 min
Tue 20 OctBelp 10:52−1 min—