S2 15272 Langnau i.E. – Laupen BE

View line S2

Langnau i.E. 18:37 → Laupen BE 19:50 Daily 1 h 13 min · 22 stops BLS

Running now · updated 19:04

Between Worb SBB and Gümligen 0 min

Estimated arrival at Laupen BE 19:50 · 75 km/h

  1. Langnau i.E.18:37
  2. Zäziwil18:51
  3. Worb SBB19:04
  4. Gümligen19:08
  5. Bern19:19
  6. Niederwangen19:29
  7. Laupen BE19:50

Today it is running no worse than usual: typical arrival delay is 0 min; 100% of the last 30 runs arrived on time.

On-time · 30 days
100%
30/30 runs under 3 min
RT coverage: 29 full · 1 partial · 0 no data
On-time · 90 days
100%
39/39 runs under 3 min
RT coverage: 38 full · 1 partial · 0 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Laupen BE, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Distribution · 90 days

39 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 3% · 1
  • On time 97% · 38
  • 3–10 min 0% · 0
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=5
  • 100% T n=5
  • 100% W n=5
  • 100% T n=5
  • 100% F n=7
  • 100% S n=6
  • 100% S n=6

Stops and timetable

Timetable of the latest run from the operator’s GTFS (22 stops).

Last 90 days, 38 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10Today
18:37on time on timePassed
18:40≈ on time ≈ on timePassed
18:44≈ on time ≈ on timePassed
18:48≈ on time ≈ on timePassed
18:51≈ on time ≈ on timePassed
18:55 / 18:56≈ on time ≈ on timePassed
18:59≈ on time ≈ on timePassed
19:04≈ on time ≈ +1 minPassed
19:08≈ on time ≈ +1 minNext
19:12≈ on time ≈ +1 min
19:14≈ on time ≈ +1 min
19:19 / 19:21≈ on time ≈ +1 min
19:25≈ on time ≈ +1 min
19:26≈ on time ≈ +1 min
19:29≈ on time ≈ +1 min
19:31≈ on time ≈ +1 min
19:33≈ on time ≈ +1 min
19:35≈ on time ≈ +1 min
19:39 / 19:40≈ on time ≈ +1 min
19:41≈ on time ≈ +1 min
19:43 / 19:44≈ on time ≈ +1 min
19:50on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Sat 7 NovGümligen 19:04Partial coverage0 min—
Fri 6 NovLaupen BE 19:490 min—
Thu 5 NovLaupen BE 19:490 min—
Wed 4 NovLaupen BE 19:490 min—
Tue 3 NovLaupen BE 19:490 min—
Mon 2 NovLaupen BE 19:52+1 min—
Sun 1 NovLaupen BE 19:490 min—
Sat 31 OctLaupen BE 19:510 min—
Fri 30 OctLaupen BE 19:510 min—
Thu 29 OctLaupen BE 19:510 min—
Wed 28 OctLaupen BE 19:510 min—
Tue 27 OctLaupen BE 19:53+2 min+3 min
Mon 26 OctLaupen BE 19:510 min—
Sun 25 OctLaupen BE 19:510 min—
Sat 24 OctLaupen BE 19:52+1 min+1 min
Fri 23 OctLaupen BE 19:54+3 min+3 min
Thu 22 OctLaupen BE 19:510 min—
Wed 21 OctLaupen BE 19:510 min—
Tue 20 OctLaupen BE 19:510 min—
Mon 19 OctLaupen BE 19:510 min—
Sun 18 OctLaupen BE 19:500 min—
Sat 17 OctLaupen BE 19:500 min—
Fri 16 OctLaupen BE 19:52+1 min—
Thu 15 OctLaupen BE 19:510 min—
Wed 14 OctLaupen BE 19:510 min—
Tue 13 OctLaupen BE 19:510 min—
Mon 12 OctLaupen BE 19:52+1 min+1 min
Sun 11 OctLaupen BE 19:510 min—
Sat 10 OctLaupen BE 19:510 min—
Fri 9 OctLaupen BE 19:520 min—