S2 15240 Langnau i.E. – Laupen BE

View line S2

Langnau i.E. 10:37 → Laupen BE 11:50 Daily 1 h 13 min · 22 stops BLS

✓ Today’s run finished

Today it reached Laupen BE at 11:50 0 min

  1. Langnau i.E.10:37
  2. Zäziwil10:51
  3. Worb SBB11:04
  4. Bern11:19
  5. Niederwangen11:29
  6. Flamatt11:39
  7. Laupen BE11:50

Next service: tomorrow 10:37 from Langnau i.E. · Sun 8 Nov

Next departure 10:37 tomorrow · Langnau i.E.
On-time · 30 days
100%
29/29 runs under 3 min
RT coverage: 29 full · 0 partial · 1 no data
On-time · 90 days
100%
41/41 runs under 3 min
RT coverage: 41 full · 0 partial · 1 no data
Typical delay
0min
Median at arrival, 90 days
30 days: 0 min
P90
+1min
9 in 10 runs arrive with less than this
30 days: +1 min

Last 30 days

Arrival delay at Laupen BE, in minutes. One bar per run.

  • On time (<3 min)
  • 3–10 min
  • 10–30 min
  • 30+ min
  • Partial coverage
  • No data

Distribution · 90 days

41 runs with a known final delay. On time = under 3 min, the same cut the map uses.

  • Early 0% · 0
  • On time 100% · 41
  • 3–10 min 0% · 0
  • 10–30 min 0% · 0
  • 30+ min 0% · 0

On-time by weekday

  • 100% M n=6
  • 100% T n=5
  • 100% W n=7
  • 100% T n=5
  • 100% F n=6
  • 100% S n=7
  • 100% S n=5

Stops and timetable

Timetable of the latest run from the operator’s GTFS (22 stops).

Last 90 days, 41 runs. At intermediate stops it is an estimate from the delay at origin and destination. Delays over 2 h count as “> 2 h”: our data does not measure them exactly.

StopSched.Usually 9 days in 10
10:37on time on time
10:40≈ on time ≈ on time
10:44≈ on time ≈ on time
10:48≈ on time ≈ on time
10:51≈ on time ≈ on time
10:55 / 10:56≈ on time ≈ on time
10:59≈ on time ≈ on time
11:04≈ on time ≈ on time
11:08≈ on time ≈ on time
11:12≈ on time ≈ on time
11:14≈ on time ≈ on time
11:19 / 11:21≈ on time ≈ on time
11:25≈ on time ≈ on time
11:26≈ on time ≈ on time
11:29≈ on time ≈ +1 min
11:31≈ on time ≈ +1 min
11:33≈ on time ≈ +1 min
11:35≈ on time ≈ +1 min
11:39 / 11:40≈ on time ≈ +1 min
11:41≈ on time ≈ +1 min
11:43 / 11:44≈ on time ≈ +1 min
11:50on time +1 min

Each run is closed into train_runs (country, train number, service day) from the live positions. Final delay = last delay seen. Partial coverage: the feed stopped before the final stop (last value used, hatched in the chart). No data: a run without any valid delay; counts as neither on time nor late. Data collected since 11 July 2026.

Will I make my connection?

Pick where you get off and how many minutes you have until your next train. We work it out from what this train did over the last 90 days.

Include the time to change platforms. It is an estimate from past data, not a guarantee. Days more than 2 h late count as a missed connection.

Recent runs

DateLast stopFinalMax
Sat 7 NovLaupen BE 11:490 min—
Fri 6 NovLaupen BE 11:490 min—
Thu 5 NovLaupen BE 11:490 min—
Wed 4 NovLaupen BE 11:490 min—
Tue 3 NovLaupen BE 11:52+1 min—
Mon 2 NovLaupen BE 11:490 min—
Sun 1 NovLaupen BE 11:510 min—
Sat 31 OctLaupen BE 11:500 min—
Fri 30 OctLaupen BE 11:510 min—
Thu 29 OctLaupen BE 11:51No data—
Wed 28 OctLaupen BE 11:510 min—
Tue 27 OctLaupen BE 11:520 min—
Mon 26 OctLaupen BE 11:520 min—
Sun 25 OctLaupen BE 11:510 min—
Sat 24 OctLaupen BE 11:510 min—
Fri 23 OctLaupen BE 11:52+1 min—
Thu 22 OctLaupen BE 11:510 min—
Wed 21 OctLaupen BE 11:510 min—
Tue 20 OctLaupen BE 11:520 min—
Mon 19 OctLaupen BE 11:510 min—
Sun 18 OctLaupen BE 11:52+1 min—
Sat 17 OctLaupen BE 11:510 min—
Fri 16 OctLaupen BE 11:510 min—
Thu 15 OctLaupen BE 11:510 min—
Wed 14 OctLaupen BE 11:510 min—
Tue 13 OctLaupen BE 11:520 min—
Mon 12 OctLaupen BE 11:510 min—
Sun 11 OctLaupen BE 11:510 min—
Sat 10 OctLaupen BE 11:52+1 min—
Fri 9 OctLaupen BE 11:510 min—